Bosch 100 ft. Self-Leveling Combo Laser w/ VisiMax Levels With Expert Accuracy
The Bosch Reconditioned GCL100-40G Green Beam Self-Leveling Cross-Line Laser with Plumb Points uses green-beam technology, which emits green lines and points up to 4X brighter than standard red beams. This gives the laser a working range for the lines of up to 165 Ft. The laser produces vertical, horizontal, cross-line modes, as well as upward and downward green plumb points. The tool can project two lines independently or together, for a broad array of alignment and leveling applications. It includes Bosch-exclusive VisiMax technology, which monitors tool temperature and power consumption to deliver the brightest line for the job. The tool has full rubber overmold housing, designed to be similar to a roll cage, so every major impact point is reinforced with rubber. It is an IP64 rating, and features deeply recessed windows help protect the laser glass. The onboard user interface allows easy selection among the layout modes. The Bosch Smart Pendulum System self-levels and indicates out-of-level condition, and it locks the pendulum for secure transport. The included RM10 Rotating Mount offers quick setup, extra-strong magnets, and fine adjustment rotating nob.
Highlights: Includes a 2-Year Allstate Warranty Easy-to-use line laser facilitates quick job setup with a range up to 165 Ft. with vertical, horizontal and cross-line modes Plumb points projects upward and downward green laser points for transferring applications with a range of up to 50 Ft. Built-in VisiMax technology monitors power consumption to maximize line visibility and extend battery life Bright green-beam laser up to 4X brighter than standard red beams Full rubber overmold housing helps protect every major impact point, with a design similar to a roll cage Easy-to-use laser setup modes controls vertical, horizontal, cross lines, and plumb points Versatile job layout lines can be projected separately or together for a variety of level and alignment applications Pulse receiver mode use an optional laser receiver for applications with a 165 Ft. working range UPC: 000346651355 Product Type: Laser Level Power Source: Battery Voltage: 1.5 V Battery Included: Yes Warranty: 1 Year
Bosch GCL100-40G-RT includes: 1x Bosch GCL100-40G Green-Beam Self-Leveling Cross-Line Laser with Plumb Points 1x Bosch RM10 Rotating Mount 2x AA Batteries 1x Hard Carry Case
About Our Products
ALL products listed are under the authorization & permission of the manufacturers who make them. We do not break up combo kits to sell the component We buy direct from the manufacturers, no middlemen
Our
Items: BRAND NEW unless they are clearly marked as "reconditioned" Reconditioned tools are refurbished by the
manufacturer ONLY
Come in their original packaging (NIB) Are warranted through the manufacturer as we are an authorized
retailer
Feedback
Tools Plus has been in business for 40+ years and we are dedicated to providing you the
highest level of quality service
.
Before leaving anything but Excellent feedback
, please contact us first so that we may offer a
resolution that ensures
that you are 100% satisfied with your purchase.
Contact us: Click on the: "ask a seller a question"
link on the listing page.
If you would like us to call you, please send your question along with your name, contact number and the
best time
to reach you.
(Please note: feedback is left once received)
Shipping
We currently only offer ground shipping within the contiguous 48 states.
We do not
ship to: Alaska or Hawaii US Protectorates (Guam, Puerto Rico, US Virgin Islands and American Samoa) P.O. Boxes or APO/FPO
Shipping and processing times are estimated and do not include weekends.
No local pickup offered. Surcharges may apply based on delivery location. Orders over $250 will require
delivery signature. An important note regarding Heavy or Bulky items
Free Shipping applies to a commercial destination with a loading dock. Non-Commercial (ex: residential etc.)
destinations "might" necessitate the need for a Lift gate or other additional expenses. These additional
expenses are extra cost and you will be contacted for your approval of these extra expenses. At this time
you can cancel your purchase without penalty. You can always ask questions in advance using the Ask a
Question feature on this page. The exception is on Jet, Powermatic, Wilton, and most Generac products
where both lift gate charges and delivery to residential addresses ARE included in the
price listed. An Important note regarding pre-opened packages we ship
In order to ensure your item arrives in the best condition possible and to avoid any possible shipping
damage, some products may be opened by us before being shipped out to you in order to add extra packing
material. We open it only to assure your order arrives in the same condition as it was when shipped to us.
Your product's safety and Your Satisfaction is our priority!
Product Images
Images in our listing are indicative of the product and may vary slightly. On occasion, the manufacturer will
make running changes to the product. If
this occurs and you receive an item that you are not satisfied with, please contact us before leaving any
negative feedback.
Accessories are NOT
included unless specified in the listing. We don't build anything. So please don't hold against us: color
variations nor changes in the products country of
origin.
Availability
Tools Plus sells through numerous outlets, therefore, items may become unavailable unexpectedly. In such
an event, at our discretion, we will either offer to back order or cancel your purchase.
Before Buying
Please contact us with
ANY questions regarding items specifics, details, and quantity.
We answer most questions from buyers within one business day (exceptions: weekends
and holidays).
If it is known that UPS and/or USPS does not deliver to the address provided at checkout, please contact us
BEFORE buying this item
to avoid additional fees for delivery.
Returns
Tools Plus is committed to providing a great customer experience with an easy return process. Tools Plus
offers FREE 60-Day returns on all items that are unused, in the original packaging and includes all
accessories/manuals.
When you put in a return request, Tools Plus will provide you with a Return Merchandise Authorization. Items
past the 60-Day return window that have defects due to faulty materials or workmanship and are within the
manufacturer’s warranty coverage (please see your owner’s manual for specifics) can be sent to the
manufacturer’s service center directly.
You will receive a full refund of the purchase amount after we receive the item back at our warehouse and the
return has been processed, provided that the item has not been used, opened, repackaged, missing pieces or
defaced. If the item does not return to us in its original condition we shipped it in, you may subject to a
partial refund instead of a full refund.
Please note that returns may take up to 48 hours to process upon receipt from carrier.
Returns Accepted for this item if it's within 30 Days