Description: 2 Fast Charging Batteries: The kit comes with two 12-Volt 2000mAh large capacity Li-ion battery packs, which means all-day operation is completely feasible and you never need to worry about running out of power in the middle of a project as long as you keep the spare charged up. A fast charger can charge one battery in as little as 1hour. 18+3 Torque Adjustment: This 12V Drill Driver can provide 220 inch-pounds of max torque and also allows you to choose between two speed setting (0 – 400 RPM or 0 – 1,500 RPM), so you will always have the power you need. The clutch has a total of 18 different torque settings and 3 modes (driving, drilling and hammer drill), in order to avoid incidents where you apply too much power and then wind up stripping the screw. Our drill driver weighs in at 2lb 3oz including the battery, which is very lightweight. You will be able to use it continuously without your arm getting tired too quickly. And the portable hard case allows you to take your tools to work anywhere, around the house or outdoors. Ergonomic Handle and Led light: The anti-slip grip ergonomic handle is made of really soft rubber, which fits nicely in your hand. Comes with a built-in LED work light, which will help you in situations when there is not enough light illuminating the work surface like small cabinets and drawers. What you get: 1*12V Cordless Drill Driver, 2* 12V Li-ion Batteries, 1* 12V Charger, 10*1” Screwdriver bits, 10*2” Screwdriver bits, 6*Nut Driver, 3* Spade drill bits, 5*drill bits, 1* Carry Case What's in the box The drill driver comes with: ①2-speed setting,low:0-400 rpm,high:0-1500 rpm ②3/8"(10mm)keyless drill chuck ③Front LED provide visibility without shadows ④18+3 Torque Setting ⑤220 In-lbs maximum output torque ⑥Auto-locking spindle ⑦Can adjust speed,rotation,torque of the driver ⑥Weighs about 2lb 3oz Including : 1*12V Cordless Lithium-Ion Drill Driver 1*Carry Case 1*12V MAX* charger 2*12V MAX* Lithium-Ion Batteries(2000mAh) 10*2" Cr-v drill bits:1/8", 5/32", 3/16",1/4",PH1,PH2,PH3,S1,S2,S3 10*1" Cr-v drill bits:1/8", 5/32", 3/16",1/4",PH1,PH2,PH3,S1,S2,S3 5* Drill Bits:5/32", 3/16", 1/4", 5/16", 3/8" 3*Spade Drill Bits: 3/8", 1/2", 5/8" 6 Nut Driver:3/16", 1/4", 9/32", 5/16", 11/32" 1* 60mm magnetic extension bar Driver Function: 1-6 Torque for small size screws 7-12 Torque for middle size screws 13-18 Torque for large size screws Drilling mode is designed for drilling wood, plastic, metal, etc. Hammer drilling is perfect for drilling cement brick, tiles, etc. Max Drilling Hole Diameter: Φ2/3" Wood; Φ1/4" Steel Plate; Φ1/3" Cement Brick
Wide Application
Returns Accepted for this item if it's within 30 Days